Control and Instrumentation
•Every long and short section (2x24=48) has
–A horizontal and vertical BPM
•Can read out turn by turn for two or 50 time points for all 96
–A beam loss monitor
•Can snapshot all 96 for each cycle
–Horizontal and vertical trims
•Originally DC.  Working on active control for the 24 high-b ones in each plane.
–Quads and Skew Quads
•Each has an individual DC setting plus common ramp.
•Chromaticity sextupoles controlled by ramps
•Some individual loss monitors at key locations.
•Horizontal pinger for tune measurement
–Couples to V plane
–Doesn’t work at the moment (had to steal kicker)